New EFP MultiPosition and EFQ MultiForce
Product Offering
(click thumbnails to expand)
Adding to our EF product family, we are very
excited to announce the immediate availability
of the Bimba EFP MultiPosition and EFQ
MultiForce cylinders.
The Bimba EFP MultiPosition cylinder is a double
acting cylinder designed to provide three (3) rod
positions in a single unit. The Bimba
EFQ MultiForce cylinder is also a double acting
cylinder that
DOUBLES the extension force of a
unit with the same bore size and stroke without
the need to increase pressure. Both cylinders
are two piston designs that saves space using
the existing EF footprint and eliminating the
need for an additional cylinder or larger bore
cylinder, respectively.
Features and Advantages
Available in all ten (10) standard bore
sizes: 12, 16, 20, 25, 32, 40, 50, 63,
80, 100 mm.
Order in any stroke(s) to the nearest 1
mm increment.
Shares the same popular benefits as the
EF Family product line including PTFE
impregnated hard anodized body that
yields low friction and maximum seal
life.
Options include internal bumpers, high
temperature seals, extra rod extensions,
rod thread end options, etc.
Introducing
HT Series™, a modular aluminum framing
system that features prefabricated mounting holes.
HT
Series is SO Easy
Building is easy with this NEW framing system
with prefabricated .328 diameter mounting holes,
which are evenly spaced at 1.50" intervals
along each face of the extrusions. These prefabricated
mounting holes can be used for fastening other
adjoining structural members, fastening components,
or accessories anywhere along the extrusion length-
all this modularity without the need for any additional
machining.
The key to the HT Series™ fastening method
is our Standard Tube Insert. For ease of assembly,
this internally threaded insert is placed into
the end of the HT Series™ extrusion with
the mounting hole in the proper orientation, and
secured into place by a spring roll pin or bolt
that is inserted through the profile and insert.
Align all the HT Series™ components to be
fastened and insert a connector bolt through the
frame. It's just that quick and easy.
If
you've got an interest in aluminum extrusions
for machine bases or guards or for any other application
where versatility, appearance, durability and
quick response are important, Knotts has a new
demo that will show you all the options and ideas
that 80/20 is famous for. Our Regional Managers
can bring this demo right to your desk or conference
room. Your ideas deserve the innovation of an
80/20 system.
Designed and built by our
80/20 Product Specialist; Mark Howe
Space-saving, high speed, high
acceleration/deceleration and quiet
operation.
The new ultra-small
linear servo cylinder offers
functions comparable to an
air cylinder at 1316mm
April - Omron's new
line of AC Drives offer a cost-effective
blend of features, performance and a wider
choice of horsepower ratings. These replace
the 3G3JV and 3G3MV models that will be
discontinued as stock is depleted.
Available in
lightweight aluminum or oxygen compatible brass
bodies
High forward
and high relief flows
Stainless
steel internal pressure sensor for industrial
durability
Standard with
0-10VDC analog output signal
The QB3H is an electronic pressure regulator
capable of operating at high pressures (to
500psig/34.47 bar) and high forward and relief
flows (to 50scfm/1416slpm). The QB3H consists of
two solenoid valves which add or subtract
pressure to the pilot of an integral volume
boosting regulator. An internal stainless steel
pressure sensor measures the output pressure of
the integral regulator and sends this signal to
the onboard controller. This controller then
modulates the two solenoid valves to match the
integral regulator’s output pressure to the
user’s requested command signal. All brass body
units are oxygen cleaned at the factory.
